Silicon carbide (SiC) powder, particularly 325# (approximately 44 microns or 325 mesh), is widely used in refractory applications due to its exceptional thermal stability, high thermal conductivity, and resistance to thermal shock and chemical corrosion.

Green silicon carbide is an excellent choice for stone polishing due to its hardness and cutting efficiency. It is best suited for hard stones like granite and quartz, while softer abrasives may be preferred for marble or limestone in later stages.

Silicon carbide (SiC) micropowder can be a valuable additive in UV coatings due to its exceptional hardness, thermal stability, and chemical resistance

Green silicon carbide (SiC) is a popular abrasive material used in lapping, polishing, and grinding applications due to its high hardness (9.2–9.5 on the Mohs scale) and sharp, angular grains. Here’s how it functions as a lapping media: Properties of Green Silicon Carbide for Lapping: High Hardness – Harder than aluminum oxide and close to diamond,

Green silicon carbide (SiC) micro powder plays a critical role in the semiconductor industry, particularly in wafer processing, power electronics, and advanced packaging, due to its exceptional hardness, thermal conductivity, and chemical stability. Below are its key applications and technological advantages: 1. Primary Applications in Semiconductor Manufacturing (1) Wafer Lapping & Polishing Silicon (Si) & Silicon Carbide

Black silicon carbide is an excellent, economical choice for cutting quartz in applications where extreme precision is not critical